You can buy Ribbon Tag Blankets in the store, but I figure, why buy one when I can make it with things I already have in my craft stash? Seriously, I already had all of the materials. So for me, this project was FREE~my favorite kind of project!
- 12×12″ square of Minky fabric (can also use fleece, flannel, or other soft fabric)
- 12×12″ square of Satin fabric
- Various ribbon strips cut approximately 2-3″ long
- sewing machine
2.) Cut your ribbon. I don’t measure exactly, just make sure you have atleast 2-3″ inch pieces.
3.) Fold ribbon pieces in half to form a loop. Leaving a small amount hanging over the edge, pin the ribbon around the edges of the main fabric. The loop should be facing the inside of the square. (By leaving a little hanging over the edge, we will be sewing over the ribbon at two different points to ensure they stay inside the blanket.)
4.) Tack down the ribbon loops with your sewing machine.
5.) Place the other fabric pieces right-sides-together. If you are using Minky and Satin as I did, pin very well! The minky and satin will slide around as you sew. Also, minky has lots of stretch to it. If you don’t pin well, it will be very wonky!
Asher is still too young to appreciate the soothing powers of a tag blanket, but isn’t he cute?